Pelco IWM-GY Long Wall Mount Spectra CCTV Cameras



In Stock - Ships Today

Pelco IWMGY Gray, Spectra Dome 24VAC, Wall Mount 

The IWMGY wall mounts are designed primarily for use with Spectra, DF5, and DF8 Series pendant domes. They can also be used with other pendant domes that utilize 1.5-inch NPT pipe for mounting. The IWMGY is constructed of aluminum and has a gray polyester powder coat finish. The IWM Series is constructed of cast aluminum and is available in a black or gray finish. The IWM Series is available in black or gray and includes an integral 24 VAC, 100 VA transformer.

Input power (120 or 240 VAC, 50/60 Hz) is selectable via an internal slide switch which is easily accessible through a front access cover plate. Input wiring can enter the arm from openings in the mounting plate or flexible metal conduit fitting may be installed on the bottom of the mount. All mounts are designed to support up to 75 pounds (34 kg). Both mounts are threaded for 1.5-inch NPT pipe, ready to accept a Spectra, DF5, or DF8 Series pendant back box. The IWMGY can be attached directly to any vertical load-bearing surface. Optional parapet, pole, and corner adapters are available. 

Features :

  • For Use with Spectra, DF5, and DF8 Series Pendant Domes; Can Also Be Used with Other PendantDomes using 1.5-inch NPT Threaded Pipe for Mounting
  • Constructed of Aluminum (IDM4018) and Cast Aluminum (IWM Series)
  • Mounts Directly to Vertical Load-Bearing Surface for Wall Mount Applications
  • Supports up to 75 Pounds (34 kg)
  • Includes Cable Feedthrough Hole
  • IWM24 Series Includes Integral 24 VAC, 100 VA Transformer for Use with Spectra Series Domes
  • Optional Parapet, Pole, and Corner Adapters Are Available 

Specification :

Model: IWMGY
Input Power: 120/240 VAC, 50/60 Hz, switchable via an internal slide switch
Output Power: 24 VAC, 100 VA transformer
Fuse: One 1.6 A, 120 VAC, fast acting One 500 mA, 240 VAC, fast acting
Suggested Mounting Method: Secure with four 3/8-inch fasteners (not supplied) suitable for the mounting surface
Dome Mounting: Dome screws directly into mount
Cable Entry: One cable feedthrough hole in mounting plate
Maximum Load: 75 lb (34 kg)
Effective Projected Area (EPA): ~48 square inches
Construction: Cast aluminum
Finish: Gray polyester powder coat
Environment: Indoor/outdoor
Unit Weight: 2.46 lb (1.12 kg)
Shipping Weight: 7 lb (3.17 kg)


    Currently there are no reviews for this product. Share your opinion with others, be the first to write a review.

Add Your Review